Below you will find:
Product Label for 30 SECONDS Outdoor Cleaner Concentrate
Product Label for 30 SECONDS Outdoor Cleaner Ready to Use
Product Label for 30 SECONDS Outdoor Cleaner Concentrate
Product Label for 30 SECONDS Outdoor Cleaner Ready to Use
Label Directions
30 SECONDS Outdoor Cleaner - CONCENTRATE
Mix 1 part 30 SECONDS Outdoor Cleaner with 1 part water. For example: Mix 1 gallon of cleaner with 1 gallon of water.
Extended Coverage
Once you are familiar with how effective 30 SECONDS Outdoor Cleaner is, then you can dilute further.
Use 4 times more water and keep the surface wet with the product 4 times as long.
Cleans up to 600 sq.ft. per gallon of Concentrate used, on porous surfaces. And cleans up to 1800 sq.ft. per gallon of Concentrate used, on non-porous surfaces.
Once you are familiar with how effective 30 SECONDS Outdoor Cleaner is, then you can dilute further.
Use 4 times more water and keep the surface wet with the product 4 times as long.
Cleans up to 600 sq.ft. per gallon of Concentrate used, on porous surfaces. And cleans up to 1800 sq.ft. per gallon of Concentrate used, on non-porous surfaces.
30 SECONDS Outdoor Cleaner – Ready To Use
This product is ready to use. No dilution is required.
Directions
Apply 30 SECONDS when the surface is DRY
Keep surface wet with product for at least 30 seconds. The saturation time will vary depending on the surface and the amount of growth. See Individual Surface Listing below for variable times needed.
It's optional to brush the surface if necessary, as stated in the Individual Surface Listing below.
Re-application, prior to rinsing, may be necessary where heavy growth occurs.
Rinse thoroughly with water, using a garden hose. The cleaning action stops when it dries.
After use, clean applicator thoroughly with water.
Store in a cool, dry place.
Helpful Hints
Always test on an inconspicuous area first, on surfaces that are susceptible to corrosive, dulling and bleaching. For example: fabric, color paving, high gloss paint and untreated metals.
Wear protective clothing and footwear to prevent bleaching to regular clothing.
Rinse from plants and metals within 10 minutes of application.
Individual Surface Listing
Concrete, Masonry, Tile, Asphalt
Spray on DRY surface.
Keep wet with the product for up to 15 minutes.
Hose off thoroughly with water.
Wood
Spray on DRY surface.
Keep wet with the product for up to 5 minutes.
Brush or sweep the surface with the grain.
Hose off thoroughly with water.
Metal, Cloth, Paint, Plastic, Fiberglass
Spray on DRY surface.
Keep wet with the product for up to 3 minutes.
Brush (if necessary) and rinse thoroughly with water, within 10 minutes.
Just spray 30 SECONDS on
and rinse off
and rinse off
A family owned company since 1977
Collier Manufacturing, LLC • 1891 NW Commerce Court • Troutdale, OR 97060 USA • Tel: (503) 669-1953
